Kia Telluride 2023 Owner's Manual page 203

Features of your vehicle
Mode selection
The mode selection button controls the
direction of the air flow through the ven-
tilation system.
OON042318
The air flow outlet ports are switched in
the following sequence:
Face-Level (B, D)
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct the air dis-
charged from the outlet.
Bi-Level (B, C, D, E)
Air flow is directed towards the face and
the floor.
Floor-Level (A, C, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.
Floor/Defrost-Level (A, C, D, E)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
Automatic climate control system
Defrost-Level (A, D)
OON042319
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
Temperature control
Driver's side
OON042317_2
The temperature will increase to the
maximum (HI) by turning the knob all
the way to the right.
The temperature will decrease to the
minimum (Lo) by turning the knob all the
way to the left.
When turning the knob, the temperature
will increase or decrease by 1 °F/0.5 °C.
When set to the lowest temperature set-
ting, the air conditioning will operate
continuously.
NOTICE
When starting the vehicle in cold
weather using manual temperature con-
trol, operate the system in the following
method to improve heating.
僅 Turn off or lower the blower, right
after starting the engine.
僅 Allow the engine to warm up during
this time since the air flow from the
heater is still cold.
Passenger's side
4
4 123