僅 Deactivating The Isg; 僅 Isg Malfunction - Kia Telluride 2023 Owner's Manual

Hide thumbs Also See for Telluride 2023:
Table of Contents

Advertisement

Driving your vehicle
僅 Outside temperature is not too low or
too high.
僅 The vehicle is driven over a constant
speed and stops.
僅 The climate control system satisfies
the conditions.
僅 The vehicle is sufficiently warmed up.
僅 The incline is gradual.
僅 The steering wheel is turned less than
180 degrees and then the vehicle
stops.
NOTICE
僅 If the ISG system does not meet the
operation condition, the ISG system is
deactivated. The light on the ISG OFF
button and yellow AUTO STOP (
indicator on the instrument cluster will
appear.
僅 If the light comes on continuously,
please check the operation condition.
Deactivating the ISG
OON052136
僅 If you wish to deactivate the ISG,
press the ISG OFF button. The light on
the ISG OFF button will illuminate.
僅 If you press the ISG OFF button again,
the ISG will be activated and the light
on the ISG OFF button will turn off.
Idle Stop and Go (ISG) system
ISG malfunction
The ISG may not operate when:
ONQ5E031430L
The ISG may not operate when an ISG
related sensor or system error occurs.
The following will happen:
僅 The yellow AUTO STOP (
tor on the instrument cluster will stay
on after blinking for 5 seconds.
僅 The light on the ISG OFF button will
)
illuminate.
When the engine is in Idle Stop mode, it's
possible to restart the engine without
the driver taking any action. Before leav-
ing the car or doing anything in the
engine compartment, stop the engine by
the ENGINE START/STOP button to the
OFF position.
NOTICE
If the AGM battery is reconnected or
replaced, ISG system will not operate
immediately. If you want to use the ISG
system, the battery sensor needs to be
calibrated for approximately 4 hours
with the ignition off. After calibration,
turn the engine on and off 2 or 3 times.
) indica-
5
5
37

Advertisement

Table of Contents
loading

Table of Contents