Kia Telluride 2023 Owner's Manual page 123

Features of your vehicle
Automatic reversal
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resis-
tance and will stop upward movement.
The window will then lower approxi-
mately 11.8 inches (30 cm) to allow the
object to be cleared.
OGL3061066L
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 1 inch (2.5 cm).
If the power window switch is being con-
tinuously pulled up again within 5 sec-
onds after the window was lowered by
the automatic window reversal feature,
the automatic window reversal will not
operate.
NOTICE
The automatic reverse feature for the
window is only active when the "auto up"
feature is used by fully pulling up the
switch. The automatic reverse feature
will not operate if the window is raised
using the halfway position on the power
window switch.
WARNING
Always check for obstructions before
raising any window to avoid injuries or
vehicle damage. If an object less than
0.16 of an inch (4 mm) in diameter is
caught between the window glass and
the upper window channel, the auto-
matic reverse window may not detect
the resistance and will not stop and
reverse direction.
WARNING
The automatic reverse feature doesn't
activate while resetting the power win-
dow system. Make sure body parts or
other objects are safely out of the way
before closing the windows to avoid inju-
ries.
WARNING
Do not install any accessories in the
vehicle that extend into the open win-
dow area. Such objects could prevent
the automatic reverse feature from
functioning.
Power window lock switch
The driver can disable the power win-
dow switches on the rear passengers'
doors by pressing the power window
lock switch to the lock position (pressed).
OON042051
When the power window lock switch is
pressed:
僅 The driver's master control can oper-
ate the front passenger's power win-
Windows
4
4 43