Kia Telluride 2023 Owner's Manual page 147

Features of your vehicle
Electric chromic mirror with
HomeLink system (if equipped)
Operating the electric rearview
mirror
OON042503
僅 Press the I button (1) to turn the auto-
matic- dimming function on. The mir-
ror indicator light will illuminate.
僅 Press the O button (2) to turn the
automatic- dimming function off. The
mirror indicator light will turn off.
HomeLink씾 Wireless Control sys-
tem
OON042504
1. Homelink buttons
2. Indicator light
3. Glare detection sensor
Your new mirror comes with an inte-
grated HomeLink Universal Transceiver,
which allows you to program the mirror
to activate your garage door(s), estate
gate, home lighting, etc. The mirror actu-
ally learns the codes from your various
existing transmitters.
Retain the original transmitter for future
programming procedures (i.e., new vehi-
cle purchase). It is also suggested that
upon the sale of the vehicle, the pro-
grammed HomeLink buttons be erased
for security purposes (follow step 1 in
"Programming HomeLink" on page 4-
67).
Programming HomeLink
Your vehicle may require the ENGINE
START/STOP button to be turned to the
ACC position for programming and/or
operation of HomeLink. It is also recom-
mended that a new battery be replaced
in the hand-held transmitter of the
device being programmed to HomeLink
for quicker training and accurate trans-
mission of the radiofrequency.
Follow these steps to train your Home-
Link mirror:
1. When programming the buttons for
the first time, press and hold the left
and center buttons (
neously until the indicator light begins
to flash after approximately 20 sec-
onds. (This procedure erases the fac-
tory-set default codes. Do not perform
this step when programming the
additional HomeLink buttons.)
OON042505
1) Flashing
NOTICE
For non-rolling code garage door open-
ers, follow steps 2-3.
For rolling code garage door openers,
follow steps 2-6.
For Canadian Programming, please fol-
low the Canadian Programming section.
For help with determining whether your
garage door opener is non-rolling code
or rolling code, please refer to the
garage door openers owner's manual or
Mirrors
4
, ) simulta-
4 67