Table of Contents
Advertisement
Driver assistance system
Blind-Spot View Monitor settings
Blind-Spot View
With the vehicle on, select Driver Assis-
tance → Blind-Spot Safety → Blind-
Spot View from the Settings menu to
turn on Blind-Spot View Monitor and
deselect to turn off the function.
Blind-Spot View Monitor opera-
tion
Turn signal switch
OON042419
Blind-Spot View Monitor will turn on and
off when the turn signal is turned on and
off.
Blind-Spot View Monitor
Operating conditions
僅 When the left or right turn signal turns
on, the image on the instrument clus-
ter will turn on.
Off conditions
Blind-Spot View Monitor will turn off
when one of the following conditions are
met:
僅 When the turn signal is turned off.
僅 When the hazard warning flasher is
on.
6
56
Blind-Spot View Monitor (BVM)
僅 When other important warning is dis-
played on the instrument cluster.
Blind-Spot View Monitor mal-
function
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display normally, have Blind-Spot View
Monitor inspected by an authorized Kia
dealer.
WARNING
僅 The image shown on the cluster may
differ from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
僅 If the camera lens is covered with for-
eign material, Blind-Spot View Moni-
tor may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol-
vents such as strong detergents con-
taining high alkaline or volatile
organic solvents (gasoline, acetone
etc.). This may damage the camera
lens.
Advertisement
Chapters
Table of Contents
