Table of Contents
Advertisement
Safety features of your vehicle
3rd row seat
OON032031
1. To use the rear seat, lift and pull the
seatback backward. Pull the seatback
firmly until it clicks into place. Make
sure the seatback is locked in place.
When you return the seatback to its
upright position, always be sure it has
locked into position by pushing on the
top of the seatback.
If you cannot see the red line at the
bottom of folding lever, it means the
seatback is locked completely.
2. Return the rear seat belt to the proper
position.
3. When the seatback is completely
installed, check the seatback folding
lever again.
Folding 2nd row seat remotely
OON032032
This feature allows you to fold seats in
the 2nd row while the liftgate is open.
1. Press the folding switch of the seat-
back located on the left and right
sides of the liftgate.
3
18
僅 L: Folding the left seat in the 2nd-
row
僅 R: Folding the right seat in the 2nd-
row
You can use additional space by fold-
ing the seatback forward.
2. If the seatback is not fully folded, try
folding again to make it completely
folded.
WARNING
Rear seat folding
Do not fold the rear seats (2nd & 3rd row
seats), if passengers, pets or luggage are
in the rear seats.
It may cause injury or damage to pas-
sengers, pets, luggage.
Walk-in seat (2nd row seat)
OON032025_2
To get in or out from the 3rd row seat:
1. Push the walk-in switch (1, 2) on the
2nd row seat when the passenger
gets in or out from 3rd row seat.
2. After getting in or out, push the 2nd
row seat to the original position until it
clicks into place. Make sure that the
seat is locked in place.
Seat
Advertisement
Chapters
Table of Contents
