Kia Telluride 2023 Owner's Manual page 356

Driver assistance system
Assist will operate when the condi-
tions are satisfied. When using the
function in countries with different
driving direction, always check the
road conditions at all times.
Turning on Smart Cruise Control
OON052291
Press the Driving Assist button to turn
on Smart Cruise Control. The speed will
be set to the current speed on the clus-
ter.
僅 If there is no vehicle in front of you,
the set speed will be maintained.
僅 If there is a vehicle in front of you, the
speed may be adjusted to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
NOTICE
If your vehicle speed is between 0~20
mph (0~30 km/h) when you press the
Driving Assist button, the set speed will
be set to 20 mph (30 km/h).
Setting vehicle distance
OON052035
6 60
Smart Cruise Control (SCC)
Each time the button is pressed, the
headway changes as follows:
For example, if you drive at 90 km/h (56
mph), the distance is maintained as fol-
lows:
僅 Distance 4: approximately 172 ft. (52.5
m)
僅 Distance 3: approximately 130 ft. (40
m)
僅 Distance 2: approximately 106 ft. (32.5
m)
僅 Distance 1: approximately 82 ft. (25 m)
NOTICE
The distance is set to the last set dis-
tance when the vehicle is restarted, or
when Smart Cruise Control was tempo-
rarily canceled.
Increasing set speed
OON052031
僅 Push the (+) switch up and release it
immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.
僅 Push the (+) switch up and hold it. The
set speed will increase by 5 mph (10
km/h) each time the switch is oper-
ated in this manner.
You can increase the set speed to 120
mph (200 km/h).