Kia Telluride 2023 Owner's Manual page 358

Driver assistance system
WARNING
Do not use the switches and buttons at
the same time. Smart Cruise Control
may not operate properly.
Displaying operating status
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to "LCD
Display Modes" on page 4-76.
OON052252
Smart Cruise Control will be displayed as
below depending on the status of the
function.
僅 When operating
1. Whether there is a vehicle ahead
and the selected distance level
2. Set speed
3. Whether there is a vehicle ahead
and the target vehicle distance
僅 When temporarily canceled
1. Your vehicle (shaded)
2. Previous set speed (shaded)
3. Whether there is a vehicle ahead
(shaded) (if equipped)
Accelerating temporarily
OON052254
6 62
Smart Cruise Control (SCC)
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
WARNING
Be careful when accelerating temporar-
ily, because the speed and distance is
not controlled automatically, even if
there is a vehicle in front of you.
Based on Driving Style operating
(if equipped)
OON052255
OON052256
A: Driving Style Adaptive SCC
When Based on Driving Style is operat-
ing, the message will appear on the clus-
ter for 2 seconds, and the distance level
and target distance will be displayed
based on the driving style.