Configuring The Local Display; Factory Setting Of Local Display For Interface Measurements; Adjusting The Local Display - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Levelflex FMP55 PROFIBUS PA
Endress+Hauser
11.5

Configuring the local display

11.5.1

Factory setting of local display for interface measurements

Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Interface linearized
Value 2 display Level linearized
Value 3 display Thickness upper layer
Value 4 display Current output 1
11.5.2

Adjusting the local display

The local display can be adjusted in the following submenu:
Setup → Advanced setup → Display
Commissioning via operating menu
Factory setting for devices with 2 current
outputs
1 value, max. size
Interface linearized
Level linearized
Current output 1
Current output 2
61