Commissioning Using The Commissioning Wizard - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Commissioning using the Commissioning Wizard

1) DeviceCare is available for download at www.software-products.endress.com. To download the software, it is necessary to register in the Endress
+Hauser software portal.
56
10 Commissioning using the Commissioning
Wizard
A Wizard is provided in FieldCare and DeviceCare
commissioning process.
1. Connect the device with FieldCare or DeviceCare.
2. Open the device in FieldCare or DeviceCare.
 The dashboard (homepage) of the device is displayed:
1 "Commissioning" button calls up the wizard
3. Click "Commissioning" to launch the Wizard.
4. Enter the appropriate value in each parameter or select the appropriate option. These
values are written directly to the device.
5. Click "Next" to go to the next page.
6. Once all the pages have been completed, click "Finish" to close the Wizard.
If you cancel the Wizard before all the necessary parameters have been entered, the
device may be in an undefined state. In such situations, it is advisable to reset the
device to the factory default settings.
1)
that guides the user through the initial
1
Levelflex FMP55 PROFIBUS PA
Endress+Hauser
A0025866