Endress+Hauser Levelflex FMP55 Operating Instructions Manual page 41

Levelflex FMP55 PROFIBUS PA
Endress+Hauser
Menu
1) If you are operating via operating tools (e.g. FieldCare), the "Language" parameter is located under "Setup
→ Advanced setup → Display"
2) Only if operating via an FDT/DTM system
3) Only available if operating via the local display
4) Only available if operating via DeviceCare or FieldCare
5) When you call up the "Expert" menu, you are always asked for an access code. If a customer-specific access
code has not been defined, "0000" must be entered.
Submenu / Meaning
parameter
Communication Contains all parameters needed to
configure the digital communication
interface.
Diagnostics Contains all parameters needed to detect
and analyze operational errors.
Operation methods
41