Level Correction - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Operating menu

Level correction

Navigation
Description
User entry
Additional information
Manual thickness upper layer
Navigation
Description
User entry
118
1 Suppression of interference echoes at the top end of the probe.
2 Suppression of the level signal in case of a flooded bypass.
UB Upper blocking distance
 Setup → Advanced setup → Interface → Level correction
Specify level correction (if required).
–200 000.0 to 200 000.0 %
The value specified in this parameter is added to the measured total and interface levels
(before linearization).
 Setup → Advanced setup → Interface → Man.thick.up.lay
Specify the manually determined interface thickness UP (i.e. the thickness of the upper
medium).
0 to 200 m
1
UB
Levelflex FMP55 PROFIBUS PA
2
UB
Endress+Hauser
A0013220

