Tall Crop Dividers (Option); Removing Tall Crop Divider - MacDon R85 Operator's Manual

6.11 Tall Crop Dividers (option)

The tall crop dividers (one on each end of the header) assist in clean crop dividing and cutterbar entry in tall crops.
Tall crop dividers are not adjustable, but can be removed easily.

6.11.1 Removing Tall Crop Divider

DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even
a pet could engage an idling machine.
1. Lower header to the ground, shut down windrower, and
remove key.
2. Open cutterbar doors. Refer to Section
Doors, page 30.
3. Remove the four bolts (A) and remove deflector (B).
4. Reinstall the four bolts (A).
5. Close cutterbar doors.
169455
OPERATING THE HEADER
5.5 Cutterbar
Figure 6.19
Figure 6.20
84
Rev. E