Tall Crop Dividers - MacDon A30-S Operator's Manual

6.17.14 Tall Crop Dividers

The tall crop dividers attach to the ends of the
header for clean crop dividing, and reel entry in
tall crops.
They can be easily adjusted to suit the crop, or
removed when not required.
C
B
a. Loosen U-bolt (A).
b. Remove bolts (B), and re-position divider (C) to
align with alternate hole location (D).
c. Re-install bolts (B), and tighten.
d. Tighten U-bolt (A)
Proceed as follows to remove tall crop dividers:
a. Remove U-bolt (A) and bolts (B), and remove
divider. Repeat for other divider.
b. Remove bolts attaching lean bar to header.
G
F
c. Remove bolts (E) attaching extensions (F) to
lean bar (G), and remove extensions.
Form 169000 / 169040
SECTION 6 OPERATION
A
D
E
d. Re-position lean bar on header at desired
height, and install existing carriage bolts (H) -
two per side. Tighten bolts.
92
H
Revision D