Dial Plan Configuration; Edit Contacts - Grandstream Networks GSC3570 User Manual

Dial Plan Configuration

Dial plan sets the rules to manage outgoing calls, to allow or block some type of calls or change the number format before
dialing out. Users can configure dial plan rules through a simple and well-designed interface under menu "Account X �� Dial
Plan".
For explanation purposes, we will be using the dial plan user interface.
The current interface features are as follow:
1. Name: Users can name their dial plans for identification.
2. Rule: The rules can be typed out separately or in combination with "Type"
3. Type: We now support the following types.
1. Pattern: The general rule and it will not change the dial plan you configured.
2. Block: The rules you set in combination with this type will be blocked.
3. Dial Now: The rules you set in combination with this type will be dialed out once the DTMF matches the Dial Plan.
4. Prefix: The rules you set in combination with this type will include configured prefix automatically. If Replaced was set,
your used prefix will replace the "Replaced" value.
123456. See configuration below.
1. Second tone: The rules you set in combination with this type will play second tone if matching the Trigger.
4. Automatically update the configured data to the Dial Plan in Call Settings.
5. Dial Plan Verification.
Notes
This feature is not supported by config files (both .xml and .txt).
Users can increase or decrease the priority of each Pattern by pressing

Edit contacts

Figure 55: Dial Plan Configuration
For example: If Dialed 3456, the DTMF will send
to move it up and to move it down.