Grandstream Networks GSC3570 User Manual page 60

Additional Override DHCP Option
Allow DHCP Option 120 to override
SIP Server
3CX Auto Provision
Automatic Upgrade
Randomized Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Disable SIP NOTIFY Authentication
Firmware Upgrade Confirmation
Config
Config Upgrade Via
Config Server Path
Config Server Username
Config Server Password
Config File Prefix
Config File Postfix
DHCP option 43 approach has priorities. The GSC3570 will fall back to the original
server path configured in case the server from option 66 fails.
When enabled, users could select Option 150 or Option 160 to override the firmware
server instead of using the configured firmware server path or the server from option
43 and option 66 in the local network.
Please note this option will be effective only when option "Allow DHCP Option 43 and
Option 66 to Override Server" is enabled. The default setting is "None".
Enables DHCP Option 120 from local server to override the SIP Server on the
GSC3570. The default setting is "No".
Enables automatic provision feature (PNP) on the GSC3570. The default setting is
"Yes".
Specifies when the firmware upgrade process will be initiated; there are 4 options:
1. No: The GSC3570 will only do upgrade once at boot up.
2. Check every X minutes: User needs to specify a period in minutes.
3. Check every day: User needs to specify "Hour of the day (0-23)".
4. Check every week: The user needs to specify "Hour of the day (0-23)" and "Day of
the week (0-6)". (Day of the week is starting from Sunday).
The default is No.
Randomized Automatic Upgrade within the range of hours of the day or postpone the
upgrade every X minute(s) by random 1 to X minute(s).
Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware
upgrades or configuration files changes.
The default value is 1.
Defines the day of the week to check HTTP/TFTP/FTP server for firmware upgrades
or configuration files changes. The default value is 1.
Device will not challenge NOTIFY with 401 when set to "Yes".
Default setting is "No".
If set to "Yes" (Default), the GSC3570 will ask the user to upgrade. If there is no
response, the GSC3570 will proceed with the upgrade.
Allows users to choose the config upgrade method: TFTP, FTP, FTPS, HTTP or
HTTPS. The default setting is "HTTPS".
Defines the server path for provisioning. Default is "fm.grandstream.com/gs"
The username for the Config server.
The password for the Config server.
Enables your ITSP to lock configuration updates. If configured, only the configuration
file with the matching encrypted prefix will be downloaded and flashed into the
GSC3570.
Enables your ITSP to lock configuration updates. If configured, only the configuration
file with the matching encrypted postfix will be downloaded and flashed into the
GSC3570.