Grandstream Networks GSC3570 User Manual page 51

System IP Address Specifies the IP Address of the system.
Door 1 Name Specifies the name of door 1.
Door 1 Access Determines the access password in case the service type option is set to GDS, the access password is
Password the one configured on "Remote PIN to Open the Door 1" field on GDS37xx settings.
Door 2 Name Specifies the name of door 2.
Door 2 Access Determines the access password in case the service type option is set to GDS, the access password is
Password the one configured on "Remote PIN to Open the Door 2" field on GDS37xx settings.
Settings �� Alarm
Allows user to select between "Serial Hunting" so call will be made towards all configured SIP
Call Mode Number by order of priority, and Parallel Hunting where all Configured SIP Numbers will receive the
call simultaneously.
Order (1-4) Displays the order of the service.
When set to "Dynamic", the GSC3570 will use the first available Account. User can specify from which
Account
account the call can be made for each destination. Default is Dynamic.
Enter the Number to receive the call.
SIP Number
User can set up to 4 SIP Numbers.
Settings �� SOS
Allows user to select between "Serial Hunting" so call will be made towards all configured SIP
Call Mode Number by order of priority, and Parallel Hunting where all Configured SIP Numbers will receive the
call simultaneously.
Order (1-4) Displays the order of the service.
When set to "Dynamic", the GSC3570 will use the first available Account. User can specify from which
Account
account the call can be made for each destination. Default is Dynamic.
Enter the Number to receive the call.
SIP Number
User can set up to 4 SIP Numbers.
Settings �� IPC
Displays the order of the IP camera
Order (1 – 32)
System
Specifies the name to identify the IP camera.
Identification
Select the signaling protocol to be used SIP, RTSP.
Connection Type
Default is SIP.
Specifies the system number, in case the system number is the SIP user ID configured on IP Camera,
System Number
or the IP address of the IP Camera itself if it is using IP call.