Restore Factory Default Settings - Grandstream Networks GSC3570 User Manual

Besides manually entering the username and password in LCD prompt, users can save the login credentials for provisioning
process as well. The username and password configuration are under GSC3570's web UI��Maintenance��Upgrade and
provisioning page: "HTTP/HTTPS Username" and "HTTP/HTTPS Password". If the saved username and password saved are
correct, login window will be skipped. Otherwise, login window will be popped up to prompt users to enter correct username
and password again.
Note
• Firmware can NOT be downgraded to 1.0.5.12 or below due to Wi-Fi security enhancement update.
• Added Support HW1.5A, 1.5B on firmware upgrade 1.0.5.21
• Factory Reset is required if upgraded from firmware 1.0.3.1 or before, to initialize all internal
parameters correctly.
• SD Card must be formatted via touch screen UI before using it for storage.

RESTORE FACTORY DEFAULT SETTINGS

Warning
Restoring the Factory Default Settings will delete all configuration information on the GSC3570. Please backup or print all the
settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and
cannot connect your device to your VoIP service provider.
There are two methods to perform factory reset on GSC3570 IP Intercom series which are described below.
Restore to factory using Web GUI
From the web GUI and as shown on the following screenshot, users need to access Maintenance��Tools they need to click on
Start to launch the factory reset process.
Restore to factory using LCD menu
Please follow the instructions below to reset the GSC3570:
Press MENU button, navigate to Settings Menu then click Reset.
Figure 60: Factory Reset from web GUI