Grandstream Networks GSC3570 User Manual page 25

LCD configuration:
1. Tap the menu button if GSC3570 is in idle state.
2. On the first screen menu, tap Settings app
3. Set Call Mode to either Serial Hunting where each number will be called one after one based in the order from 1-4 after
first call times out, or Parallel Hunting where all configured numbers receive the call simultaneously.
4. Select the Account from which the call will be made and enter the SIP extension or IP address to be called. (Default is
Dynamic, so the GSC will use the first available line).
5. Click on Save icon.
GSC3570 LCD SETTINGS
The GSC3570 LCD MENU provides an easy access to the settings on the GSC3570. Some of the settings from Web GUI could
be configured via the LCD as well. The following table shows the LCD menu options.
Status
Figure 46: Alarm: Web Configuration
�� Advanced �� Alarm Settings.
Figure 47: Alarm: LCD Configuration
1. Account status
2. Network status