How To Dial; Figure 12: Method 2 - Gxw410X: Call Forwarding - Grandstream Networks UCM6100 Series Configuring

Ucm6100 series with gxw410x

Hide thumbs Also See for UCM6100 Series:

Table of Contents

How to Dial

Once the GXW410X and the UCM6100 are set up as above, the inbound call and the outbound call will be

working as described below.

•

Outbound call

The extension registered to the UCM6100 can dial prefix + PSTN number to reach outside numbers in

PSTN network, as defined in UCM6100 outbound route.

•

Inbound call

The user from outside network can dial into the PSTN line's number (connected to GXW410X). And

then he/she will reach the IVR of the UCM6100. The IVR on UCM6100 would allow the user to further

enter extension number or key pressing digit to reach the desired destination. The inbound call will go

through the inbound route set up on the UCM6100.

Firmware Version 1.4.1.4

Configuring UCM6100 Series with GXW410X

Page 9 of 18

Table of Contents