Grandstream Networks GSC3570 User Manual page 53

Time Zone Configures the date/time used on the GSC3570 according to the specified time zone.
Allow DHCP
Option 2 to
Defines whether DHCP Option 2 should override time zone or not. The default setting is "Yes".
Override Time
Zone Setting
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead (when daylight saving) which is U.S
central time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A:
Self-Defined Time
International or Greenwich Meridian) and negative (-) if it is east.
Zone
M4.1.0,M11.1.0
st
The 1 number indicates Month: 1,2, 3..., 12 (for Jan, Feb, ..., Dec)
nd
The 2
rd
The 3 number indicates weekday: 0,1, 2...,6 (for Sun, Mon, Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of April to the 1 Sunday of
November.
Configures the date display format on the LCD.
The following formats are supported:
yyyy-mm-dd: 2012-07-02
Date Display
mm-dd-yyyy: 07-02-2012
Format
dd-mm-yyyy: 02-07-2012
dddd, MMMM dd: Friday, October 12
MMMM dd, dddd: October 12, Friday
The default setting is yyyy-mm-dd.
Time Display Configures the time display in 12-hour or 24-hour format on the LCD. The default setting is in 12-
Format hour format.
Settings ��
Preferences ��Web
Service
Web Service
Enable/Disable the Auto location service.
Control
Settings ��
Preferences ��
Language
th
number indicates the n iteration of the weekday: (1 Sunday, 3 Tuesday...)
st rd
st