Saving Configuration Changes; Rebooting From Remote Locations; Packet Capture - Grandstream Networks GSC3570 User Manual

Figure 57: Download XML phonebook
Phonebook Download Interval:
After each time the interval set for "Phonebook Download Interval" passes, the Intercoms will download the Phonebook.

Saving Configuration Changes

After users makes changes to the configuration, press the "Save" button will save but not apply the changes until the "Apply"
button on the top of web GUI page is clicked. Or users could directly press "Save and Apply" button. We recommend
rebooting or powering cycle the GSC3570 after applying all the changes.

Rebooting from Remote Locations

Press the "Reboot" button on the top right corner of the web GUI page to reboot the GSC3570 remotely. The web browser will
then display a reboot message. Wait for about 1 minute to log in again.

Packet Capture

GSC3570 is embedded with packet capture function. The related options are under Maintenance��Packet Capture.
Figure 58: Packet Capture
User can also define whether RTP packets will be captured or not from With RTP Packets option.
When the capture configuration is set, press Start button to start packet capture. The Status will become RUNNING while
capturing. Press Stop button to end capture.