Grandstream Networks GSC3570 User Manual page 43

SUBSCRIB
E for
When set to "Yes", a SUBSCRIBE for Registration will be sent out periodically. The default setting is "No".
Registrati
on
The use of the PRACK (Provisional Acknowledgment) method enables reliability to SIP provisional responses
Enable (1xx series). This is particularly important to support PSTN internetworking. To invoke a reliable provisional
100rel response, the 100rel tag is appended to the value of the required header of the initial signaling messages. The
default setting is "No".
When set to "Auto", the GSC3570 will update the callee ID in the order of P-Asserted Identity Header, Remote-
Callee ID
Party-ID Header and To Header in the 180 Ringing. If "Disabled", callee ID will be displayed as "Unavailable".
Display
When set to "To Header", caller ID will not be updated and displayed as To Header.
When set to "Auto", the GSC3570 will look for the caller ID in the order of P-Asserted Identity Header,
Caller ID Remote-Party-ID Header and From Header in the incoming SIP INVITE. When set to "Disabled", all incoming
Display calls are displayed with "Unavailable". When set to "From Header", the GSC3570 will display the caller ID based
on the From Header in the incoming SIP INVITE. The default setting is "Auto".
Add Auth
Header To define whether authorization Header will be added on initial REGISTER from the first REGISTER. The default
on Initial setting is "No".
REGISTER
Allow SIP This is used to perform a factory reset through SIP NOTIFY. When the GSC3570 receives the NOTIFY with
Reset event:reset, the GSC3570 should perform a factory reset after the authentication. The default setting is "No".
Ignore
This option is used to configure default ringtone. If set to "Yes", configured default ringtone will be played. The
Alert-Info
default setting is "No".
header
Account x
�� SIP
Settings
��
Custom
SIP
Headers
Controls whether the Privacy header will present in the SIP INVITE message or not, whether the header
Use
contains the caller info. If set to "Yes", the Privacy Header will always show in INVITE. If set to "No", the Privacy
Privacy
Header will not show in INVITE. Default setting is "Default".
Header
Use P-
Controls whether the P-Preferred-Identity Header will present in the SIP INVITE message. The default setting is
Preferred
"default" If set to "Yes", the P-Preferred-Identity Header will always show in INVITE.
- Identity
If set to "No", the P-Preferred-Identity Header will not show in INVITE.
Header
Use X-
Grandstre Enables / disables the use of X-Grandstream-PBX header in SIP request. When disabled, the SIP message sent
am-PBX from the GSC3570 will not include the selected header. Default setting is "Yes".
Header