Grandstream Networks GSC3570 User Manual page 56

Maximum Transmission Unit
(MTU)
OpenVPN® Enable
OpenVPN® Server Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
OpenVPN® Certificate
OpenVPN® Client Key
OpenVPN® Cipher Method
OpenVPN® Username
OpenVPN® Password
Additional Options
Network �� SNMP Settings
Enable SNMP
Version
Port
Community
SNMP Trap Version
"Enabled".
Configure custom MTU. Default is 1500.
Network �� OpenVPN® Settings
Enable/Disable OpenVPN® feature. Default is No.
Specify the IP address or FQDN for the OpenVPN® Server.
Specify the listening port of the OpenVPN® server. Default is 1194.
Specify the Transport Type of OpenVPN® whether UDP or TCP. Default is UDP.
Click on "Upload" to upload the Certification Authority of OpenVPN®. For a new upload,
users could click on "Delete" to erase the last certificate, and then upload a new one.
Click on "Upload" to upload OpenVPN® certificate. For a new upload, users could click
on "Delete" to erase the last certificate, and then upload a new one.
Click on "Upload" to upload OpenVPN® Key.
For a new upload, users could click on "Delete" to erase the last certificate, and then
upload a new one.
Specifies the Cipher method used by the OpenVPN® server. The available options are:
Blowfish, AES-128, AES-256 and Triple-DES. Default setting is: Blowfish.
Configures the optional username for authentication if the OpenVPN server supports it.
Configures the optional password for authentication if the OpenVPN server supports it.
Additional options to be appended to the OpenVPN® config file, separated by
semicolons. For example, comp-lzo no;auth SHA256
Note: Please Make sure that the options are recognizable by OpenVPN® and do not
unnecessarily override the other configurations above.
Enables/Disables the SNMP feature. Default settings is No.
SNMP version:
● Version 1
● Version 2
● Version 3 (Default)
SNMP port (Default 161).
Enters SNMP Community.
SNMP Trap Version
● Trap Version 1
● Trap Version 2 (Default)
● Trap Version 3