Grandstream Networks GSC3570 User Manual page 39

Accounts Page Definitions
Account x
��
General
Settings
Account
This field indicates whether the account is active. The default setting is "Yes".
Active
Account
The name associated with each account to be displayed on the LCD.
Name
The URL or IP address, and port of the SIP server.
SIP Server
This is provided by your VoIP service provider (ITSP).
Secondar The URL or IP address, and port of the SIP server. When configured, GSC3570 will register to both Primary and
y SIP Secondary SIP Server. If Primary SIP Server is not reachable then the GSC3570 will use Secondary SIP Server for
Server GSC3570 services (including making/receiving calls).
IP address or Domain name of the Primary Outbound Proxy, Media Gateway, or Session Border Controller. It is
Outbound
used by the GSC3570 for Firewall or NAT penetration in different network environments.
Proxy
If a symmetric NAT is detected, STUN will not work and ONLY an Outbound Proxy can provide a solution.
Backup
IP address or Domain name of the Secondary Outbound Proxy which will be used when the primary proxy
Outbound
cannot be connected.
Proxy
User account information provided by your VoIP service provider (ITSP).
It is usually in the form of digits like phone number or a phone number.
SIP User
Notes:
ID
Users can register an account with a SIP user ID that carries "@". (For example: "111@test.com", so the
GSC3570 will register the account as "111@test.com" instead of 111)
The server domain will not be included in the SIP from header.
SIP service subscriber's Authenticate ID used for authentication.
Authentic
ate ID
It can be identical to or different from the SIP User ID.
The account password required for the GSC3570 to authenticate with the ITSP (SIP) server before the account
Authentic
can be registered.
ate
Password
After it is saved, this will appear as hidden for security purpose.
Name The SIP server subscriber's name (optional) that will be used for Caller ID display.
Voice
Mail This parameter allows you to access voice messages by pressing the MESSAGE button on the GSC3570. This ID
Access is usually the VM portal access number. For example, in UCM6xxx IPPBX, *97 could be used.
Number