Alarm Settings - Grandstream Networks GSC3570 User Manual

Reboot
Reboot the GSC3570.
Advanced
Accounts
Set up to 4 SIP accounts. Account Settings page allows to configure SIP settings for each account. Tap on Account# to access
the settings, when configured press
them. Users can press Empty configuration on the bottom of the page to clear all the settings. Following settings can be
configured for each account. Refer to [Account/General Settings] for description of each option.
Account Activation: activate/deactivate the current SIP account.
SIP Server: enter the SIP server FQDN or IP.
SIP User ID: Set the SIP Account User ID.
SIP Authentication ID: Set the SIP Account Authentication ID.
SIP Authentication Password: Set the SIP Account Authentication Password.
Account Name: Enter the Account Name.
Display Name: Enter the extension name to be displayed on LCD.
Outbound Proxy: Enter the Outbound Proxy URL.
Voicemail Access Number: Configure the Voicemail access number.
Monitor
Door System: Add/Edit or delete the GDS37xx's configuration. Make Call to GDS37xx.
Device Type: Select either Door System or IP Camera.
Device Name: Set the device name.
Connection type: Select the signaling protocol to be used SIP, RTSP. The default is SIP.
Device Number: Set the SIP extension or the IP address of the Door System.
Door 1/2: Enter the DTMF PIN to open the door remotely.
IP Camera: Add/Edit or delete the IP Camera's configuration. Make Call to IP Camera.
Device Type: Select either Door System or IP Camera.
Device Name: Set the device name.
Device Number: Set the SIP extension or the IP address of the IP Camera.

Alarm Settings

Select the Call Mode and configured from which account to make calls when alarm is triggered as well as the receiving
numbers.
Call Mode: Select between Serial or Parallel Hunting.
Number 1-4: Set the Account from which the outgoing call will be made and towards which Number.
SD Card
SD card inserted into the SD card slot can be used to store snapshots triggered by motion detection alarm of IP cameras, or
snapshots of doorbell call or open-door events.
sign (on the top right corner) to confirm the changes or press back button to cancel