Grandstream Networks GSC3570 User Manual page 59

Door settings
Maintenance �� Upgrade and Provisioning
Upgrade Firmware
Firmware Upgrade and Provisioning
Always Authenticate Before
Challenge
Validate Hostname in Certificate
Allow DHCP Option 43 and Option
66 to Override the Server
WIFI settings on LCD: if enabled, the user will be required enter the configuration
password to manage Wi-Fi settings form the LCD screen.
Auto answer settings on LCD: if enabled, the user will be required enter the
configuration password to manage Auto answer settings form the LCD screen.
DND settings on LCD: if enabled, the user will be required enter the configuration
password to manage DND settings form the LCD screen.
Arming mode settings on LCD: if enabled, the user will be required enter the
configuration password to manage arming mode settings form the LCD screen.
Alarm zone settings on LCD: if enabled, the user will be required enter the
configuration password to manage alarm zone settings form the LCD screen.
Digital output settings on LCD: if enabled, the user will be required enter the
configuration password to manage digital output settings form the LCD screen.
Sound settings on LCD: if enabled, the user will be required enter the configuration
password to manage sound settings form the LCD screen.
Display settings on LCD: if enabled, the user will be required enter the configuration
password to manage display settings form the LCD screen.
Language settings on LCD: if enabled, the user will be required enter the
configuration password to manage language settings form the LCD screen.
Time and date settings on LCD: if enabled, the user will be required enter the
configuration password to manage time and date settings form the LCD screen.
Reboot settings on LCD: if enabled, the user will be required enter the configuration
password to manage reboot settings form the LCD screen.
Screen lock settings on LCD: if enabled, the user will be required enter the
configuration password to manage arming mode settings form the LCD screen.
Account settings on LCD: if enabled, the user will be required enter the configuration
password to manage account settings form the LCD screen.
SD card settings on LCD: if enabled, the user will be required enter the configuration
password to manage SD card settings form the LCD screen.
Alarm settings on LCD: if enabled, the user will be required enter the configuration
password to manage alarm settings form the LCD screen.
Syslog settings on LCD: if enabled, the user will be required enter the configuration
password to manage syslog settings form the LCD screen.
System update settings on LCD: if enabled, the user will be required enter the
configuration password to manage system update settings form the LCD screen.
FTP settings on LCD: if enabled, the user will be required enter the configuration
password to manage FTP settings form the LCD screen.
Reset settings on LCD: if enabled, the user will be required enter the configuration
password to manage reset settings form the LCD screen.
If enabled, this feature allows user to add an icon at the LCD screen to open the doors
of the paired GDS37xx. Default is disabled.
Allows users to upload the firmware file locally by pressing Start, after selecting the
correct firmware file from the local storage, the GSC3570 will start the firmware
upgrade automatically.
Specifies how firmware upgrading and provisioning request to be sent: Always Check
for New Firmware, Check New Firmware only when F/W pre/suffix changes, Always
Skip the Firmware Check.
The default setting is "Always Check for New Firmware".
Only applies to HTTP/HTTPS. If enabled, the GSC3570 will send credentials before
being challenged by the server. The default setting is "No".
After enabling this feature, device validate the hostname in the SSL certificate. The
default setting is "No".
The default setting is "Yes". DHCP option 66 originally was only designed for the
TFTP servers. Later, it was extended to support an HTTP URL. GSC3570 supports
both TFTP and HTTP servers via option 66. Users can also use the DHCP option 43
vendor-specific option to do this.