Grandstream Networks GSC3570 User Manual page 31

Instant Alarm: Alarm is armed instantly when triggered.
24h Alarm: Alarm is always armed when triggered.
DO Settings
Configures the Door Open settings on the GSC3750, you can choose to put the DO mode to :
Disable
Alarm Out
Open Door
Incoming Call Ringing
in the Open Door Mode, the following Parameters are defined :
Door unlock holding time (S): Duration of time in seconds that the door remains open.
Door system SIP user id: Defines the SIP extension of the Door system used.
Door system IP Address: Defines the IP Address of the Door system used.
Door Control SIP account: Defines the Account used on the door system side for the GSC3570 Relay Mode
Door Control Password: Defines the Account used on the door system side for the GSC3570 Relay Mode
Display opendoor icon at desktop: Enables the option to display the open door icon on homescreen , This Open Door
Button has a higher priority than the GDS device in Monitor => Door System.
The Door Open feature is disabled by Default.
FTP Server Settings
The GSC3570 now has built-in FTP server (like all other Grandstream GXV3xxx video IP phones).
Press "Setting" on the touch screen, get into the "Settings" screen, then touch the "FTP server settings" to configure the FTP
server parameters, as shown in below screenshot:
By default, the FTP Server is disabled. Touch to "Enable" the FTP, then configure the Port used, create username and Password.
The default port is TCP 21, but customer can configure to different port based on network condition.
Note
Figure 52: FTP Server Settings
Figure 53: Enable FTP Server Settings