Added support to display two open door icons for the door system supporting two doors configuration. [Connecting
GSC3570 with GDS37xx]
Added turn on LCD when the device in energy save mode (LCD Off) but the secure open-door event happened. [Secure
Open Door Peering with GDS37xx]
Added Panel in idle screen (top right corner) to display detailed information. [Idle Screen]
Added remote open door via GDS without SIP call. [Open Door via GDS37xx with or without a SIP Call]
Added functioning as doorbell and direct open door when connected to strike. [Using GSC3570 as Doorbell and Door
opener]
Added screen snapshot feature during RTSP streaming or SIP Video Call. [Screen Snapshot During RTSP Streaming or SIP
Video Call]
Firmware Version 1.0.5.4
Added support for RTSP. [Connection Type]
Added Secure Open Door by using GSC3570 (Alarm Output Interface) controlling strike/lock from the inside building via
peering with GDS37xx. [Secure Open Door Peering with GDS37xx]
Added support for switching to RTSP Monitor during an active SIP call. [Switching to RTSP Monitor during an active SIP
call]
Added support for FTP server settings and SD card. [FTP Server Settings] [SD Card]
Added Tooltip specified file requirement for uploading customized wallpaper. [Upload Wallpaper]
Added support to customize the main idle screen. [Desktop Settings]
Added Open Door softkey support for 3 party door systems. [Connecting GSC3570 with 3 Party Door Access Systems]
Added VLAN functions in "General networking settings" at LCD Settings. [General Networking Settings]
Added Czech language support in touch UI. [Language]
Firmware Version 1.0.3.1
This is the initial version for GSC3570.
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT
rd
rd