Upgrading And Provisioning - Grandstream Networks GSC3570 User Manual

Press Download button to download capture file to local PC. The capture file is in .pcap format.

UPGRADING AND PROVISIONING

The GSC3570can be upgraded via TFTP / FTP / FTPS / HTTP / HTTPS by configuring the URL/IP Address for the TFTP / HTTP /
HTTPS / FTP / FTPS server and selecting a download method. Configure a valid URL for TFTP, FTP/FTPS or HTTP/HTTPS, the
server's name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com
There are two ways to setup a software upgrade server: The LCD Menu or the Web Configuration Interface.
Upgrade via LCD Menu
Follow the steps below to configure the upgrade server path via LCD menu:
Press MENU button and navigate to System.
In the System options, tap System Updates.
Click Update now.
Upgrade via Web GUI
Open a web browser on PC and enter the IP address of the GSC3570. Then, login with the administrator username and
password. Go to Maintenance��Upgrade and Provisioning page, enter the IP address or the FQDN for the upgrade server in
"Firmware Server Path" field and choose to upgrade via TFTP or HTTP/HTTPS or FTP/FTPS. Update the change by clicking the
"Save and Apply" button. Then "Reboot" or power cycle the GSC3570 to update the new firmware.
When upgrading starts, the screen will show upgrading progress. When done you will see the GSC3570 restart again. Please
do not interrupt or power cycle the GSC3570 when the upgrading process is on.
Firmware upgrading takes around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. We recommend
completing firmware upgrades in a controlled LAN environment whenever possible.
Figure 59: LCD upgrade