Chapter 11 Installing Accessories; Introduction; Antistatic Protection - Epson AcuLaser CX37DN Series User Manual

Chapter 11
Installing Accessories

Introduction

Note:
Use of accessories not manufactured or supported by Epson will void your warranty.
Dual In-Line Memory Module
(DIMM)
500-Sheet Paper Cassette Unit
(Tray 3)
Hard Disk Drive
Note:
❏ Installing accessories always requires that the machine and accessories are turned off and unplugged
during installation.
❏ This printer does not support CompactFlash card.

Antistatic Protection

Note:
It's very important to protect the printer controller board from electrostatic damage while performing
any task involving the controller board.
Turn off all power switches first. If an antistatic wrist strap is provided in this machine option kit, attach
one end of it to your wrist and the other end to the bare metal chassis on the back of this machine. Never
attach the wrist strap to any piece of equipment with an electrical current present. Plastic, rubber, wood,
painted metal surfaces, and telephones are not acceptable grounding points.
If you don't have an antistatic wrist strap, discharge your body's static electric charge by touching a
grounded surface before you handle any circuit boards or components. Also avoid walking around after
grounding yourself.
Epson AcuLaser CX37 Series
512 MB DIMM
500-sheet tray included
SATA Hard Disk
Printer/Copier/Scanner User's Guide
Installing Accessories 236