Service Messages - Epson AcuLaser CX37DN Series User Manual

This message...
USB MEMORY FULL
Waste Near Full
WASTE TONER FULL
REPLACE BOTTLE
WRONG PASSWORD
xxx
xxx COVER OPEN
CLOSE xxx COVER
xxx DOOR OPEN
CLOSE xxx DOOR
xxx IS DISABLED
xxx SERVER ERROR

Service Messages

These messages indicate a more serious fault that can only be corrected by a customer service engineer.
If one of these messages appears, turn the machine off, then turn it on again. If the problem persists,
contact your local vendor or authorized service provider.
This service message...
MACHINE TROUBLE
SERVICE CALL (xxxx)
Epson AcuLaser CX37 Series
means...
There is no space available on the
USB memory device connected
to this machine.
The waste toner bottle will soon
be full.
The waste toner bottle is full.
The password is incorrect, so the
indicated server could not be
accessed.
The indicated cover is open.
The indicated door is open.
The TCP/IP, FTP, SMTP or SMB
settings are disabled.
The file cannot be saved on the
indicated server.
means...
An error has been detected with the
item indicated "XXXX" in the service
message.
Printer/Copier/Scanner User's Guide
Do this...
Delete data from the USB memory
device to create free space, or use a
different USB memory device.
Prepare a waste toner bottle.
Replace the waste toner bottle.
Check the password, and then specify
the correct one.
Close the indicated cover.
Close the indicated door.
Enable the TCP/IP, FTP, SMTP or SMB
settings.
Check the status of the indicated
server.
Do this...
Reboot the machine. This often clears
the service message, and machine
operation can resume.
If the problem persists, contact
Technical Support.
Troubleshooting 235