Epson AcuLaser CX37DN Series User Manual page 177

The following instructions show the procedure to replace the photoconductor unit (Black).
Note:
Dispose of the used photoconductor unit according to your local regulations.
Do not burn the photoconductor unit.
8. Check the color of the new photoconductor unit to be installed.
Note:
In order to prevent toner from spilling, leave the photoconductor unit in the bag until step 7 is being
performed.
9. Remove the photoconductor unit from the bag.
10. Hold the photoconductor unit with both hands, and then shake it twice as shown in the
illustration.
Epson AcuLaser CX37 Series
Replacing Consumables and Maintenance Parts
Printer/Copier/Scanner User's Guide
177