Setting The Scan Size; Setting The Scan Color - Epson AcuLaser CX37DN Series User Manual

1. In the main screen (Scan mode), press the u or d key to select the current simplex/duplex
(single-sided/double-sided) setting, and then press the Select key.
2. Press the u or d key to select 2-SIDE, and then press the Select key.
3. Press the u or d key to select LONG EDGE or SHORT EDGE, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
For details on LONG EDGE and SHORT EDGE, refer to "Duplex (Double-Sided) Copying From the
ADF" on page 134.
4. Specify the desired scan settings.
5. Load the document into the ADF for the front side to be scanned.
6. To scan color scans, press the Start (Color) key. To print monochrome scans, press the Start
(B&W) key.
The front side of the document is scanned.
7. Load the document into the ADF for the back side to be scanned, and then press the Select key.
The back side of the document is scanned.

Setting the Scan Size

The size of the scan data can be specified.
1. In the main screen (Scan mode), press the u or d key to select the current scan size setting, and
then press the Select key.
2. Press the u or d key to select the desired size, and then press the Select key.
The main screen (Scan mode) appears again.

Setting the Scan Color

The color of the scan data can be specified.
1. In the main screen (Scan mode), press the u or d key to select the current scan color setting, and
then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 164