Epson AcuLaser CX37DN Series User Manual page 59

POP DISABLE/ENABLE
BEFORE
SMTP
POP3 SERVER ADDR.
POP3 PORT NO.
POP3 TIMEOUT
POP3 ACCOUNT
POP3 PASSWORD
SMTP DISABLE/ENABLE
AUTH.
SMTP USER NAME
SMTP PASSWORD
Epson AcuLaser CX37 Series
Settings
Select whether or not to enable POP Before SMTP.
If ENABLE is selected, specify the time (between 0 and 60
seconds). The default setting is 1sec.
*3
Specify the host name or IP address for the POP3 server
used for authentication with POP Before SMTP.
The default setting is 0.0.0.0.
*3 Settings
Specify the port number used for communicating with
the POP3 server.
*3 Settings
Select the amount of time (in seconds) until the con‐
nection with the POP3 server times out.
*3 Specify the user name (up to 63 characters) used for
authentication with POP3 server.
*3
Specify the password (up to 15 characters) used for au‐
thentication with POP3 server.
Settings
Select whether or not to enable SMTP authentication.
*4
Specify the user name (up to 63 characters) used for
SMTP authentication.
*4
Specify the password (up to 15 characters) used for
SMTP authentication.
Control Panel and Configuration Menu
Printer/Copier/Scanner User's Guide
DISABLE / ENABLE
1-65535 (Default: 110)
30-300 sec (Default: 30 sec)
DISABLE / ENABLE
59