Epson AcuLaser CX37DN Series User Manual page 161

2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
4. Use the keypad to type in the number (between 1 and 20) for the group dial destination to be
edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears for about two seconds.
5. Press the u or d key to select EDIT to edit information or DELETE to delete the destination, and
then press the Select key.
If DELETE was selected, the settings are deleted, and the DIAL REGISTER menu appears again.
6. If desired, edit the group name, and then press the Select key.
Note:
For details on entering/editing text, refer to Facsimile User's Guide.
7. Press the u or d key to select ADD to add a speed dial destination, CHECK/EDIT to delete the
destination or FINISH to finish editing, and then press the Select key.
If FINISH was selected, the edited settings are saved, and the DIAL REGISTER menu appears
again. If ADD was selected, continue with step 6 of "Registering Group Dial Destinations" on
page 160. If CHECK/EDIT was selected, continue with step 8.
8. Press the u or d key to select the speed dial destination to be deleted, and then press the Stop/
Reset key.
Note:
To check the settings for the selected speed dial destination, press the Select key.
9. Press the u or d key to select YES, and then press the Select key.
10. After the speed dial destination is deleted, press the Back key.
11. To delete another speed dial destination, repeat the procedure from step 8.
12. To finish deleting speed dial destinations, press the u or d key to select FINISH, and then press the
Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 161