Epson AcuLaser CX37DN Series User Manual page 84

Epson AcuLaser CX37 Series
PCL CR/LF MAPPING
LINES PER PAGE
FONT SOURCE
*1
DIGITAL SGN.
XPS
XPS ERROR
PAGE
Printer/Copier/Scanner User's Guide
Settings
CR=CR LF=LF / CR=CRLF LF=LF /
CR=CR LF=LFCR / CR=CRLF LF=LFCR
Select the definitions of the CR/LF codes in the PCL lan‐
guage.
Settings 5-128 (Default: 60)
Specify the number of lines per page in the PCL language.
FONT NUMBER Settings
Specify the default font in the PCL
language.
The font numbers that appear corre‐
spond to the PCL font list. For details
on printing the font list, refer to "RE‐
PORT" on page 47.
PITCH SIZE Settings
(POINT SIZE)
Specify the font size in the PCL lan‐
guage.
If the selected FONT NUMBER is for a
bitmap font, PITCH SIZE appears. If
the selected FONT NUMBER is for an
outline font, POINT SIZE appears.
SYMBOL SET Specify the symbol set used with the
PCL language.
The default setting is PC8.
Settings ENABLE / DISABLE
Select whether to enable or disable XPS digital signatures.
If ENABLE is selected, XPS digital signatures are enabled.
If DISABLE is selected, XPS digital signatures are disabled.
Settings
ON / OFF
Select whether or not an error report is printed after an XPS
error has occurred.
If ON is selected, the error report is printed.
If OFF is selected, the error report is not printed.
Control Panel and Configuration Menu
0-102 (Default:
0)
0.44-99.99
(Default: 10.00)
(4.00-999.75
(Default: 12.00)
84