*1
BOOTP
*1
ARP/PING
*1
HTTP
*1
FTP SERVER
*1
FTP TX
*1
SMB
*1
BONJOUR
*1
DYNAMIC DNS
*1
IPP
Epson AcuLaser CX37 Series
Settings
If there is a BOOTP server on the network, specify
whether the IP address and other network information
is automatically assigned by the BOOTP server.
Settings
Select whether or not the ARP/PING command is used
when the IP address is assigned.
Settings
Select whether or not to enable HTTP.
Settings
Select whether or not to enable the FTP server.
Settings
Select whether or not to enable the FTP client.
Settings
Select whether or not to enable SMB.
Settings
Select whether or not to enable Bonjour.
Settings
Select whether or not to enable Dynamic DNS.
Settings
Select whether or not to enable IPP.
Note:
If HTTP is set to DISABLE, IPP cannot be set.
Control Panel and Configuration Menu
Printer/Copier/Scanner User's Guide
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
DISABLE / ENABLE
55