Specifying Multiple Destination Addresses - Epson AcuLaser CX37DN Series User Manual

Specifying Multiple Destination Addresses

A destination address can be added if a destination e-mail address is specified.
Note:
If an FTP address or an SMB address was selected, multiple destination addresses cannot be specified.
1. In the main screen (Scan mode), press the u or d key to select the current data destination setting,
and then press the Select key.
2. Press the u or d key to select ADD, and then press the Select key.
3. Specify the destination address.
Note:
For details on typing in an e-mail address, refer to "Directly Entering the E-mail Address" on
page 147.
For details on selecting from the favorite list, refer to "Selecting From the Favorite List" on page 148.
For details on selecting a speed dial destination, refer to "Selecting a Speed Dial Destination" on
page 148.
For details on selecting a group dial destination, refer to "Selecting a Group Dial Destination" on
page 149.
For details on selecting from the address book, refer to "Selecting From the Address Book" on
page 150.
For details on searching the address book, refer to "Searching the Address Book" on page 150.
For details on searching an LDAP server, refer to "Searching an LDAP Server" on page 151.
Editing a Specified Destination Address
A specified destination e-mail address can be edited.
Note:
FTP addresses, SMB addresses and addresses registered as speed dial destinations or group dial
destinations cannot be edited.
1. In the main screen (Scan mode), press the u or d key to select the current data destination setting,
and then press the Select key.
2. Press the u or d key to select CHECK/EDIT, and then press the Select key.
3. Press the u or d key to select the e-mail address to be edited, and then press the Select key.
4. Use the keypad to edit the e-mail address, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 153