Specifying The Subject; Deleting A Queued Transmission Job - Epson AcuLaser CX37DN Series User Manual

2. Press the u or d key to select BW Only or COLOR or GRAY, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏ If JPEG is selected as the data format, the scan color is set to BW Only, and the data format is
automatically set to PDF.
❏ Settings for SCAN SETTING/CODING METHOD in the UTILITY menu are available only if BW
Only is selected.

Specifying the Subject

Specify the subject used when sending scan data as e-mail.
1. In the main screen (Scan mode), press the u or d key to select SUBJECT, and then press the Select
key.
2. Use the keypad to type in the subject name, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏ For details on entering/editing text, refer to Facsimile User's Guide.
❏ To erase the specified subject name, press the Back key.

Deleting a Queued Transmission Job

The list of jobs queued for transmission can be displayed, and a job can be deleted.
1. In the main screen (Scan mode), press the u or d key to select CANCEL RESERV., and then press
the Select key.
2. Press the u or d key to select the job to be deleted, and then press the Select key.
Note:
❏ To check the information for the selected job, press the r key.
❏ If no jobs are queued for transmission, NONE appears.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 165