Epson AcuLaser CX37DN Series User Manual page 58

E-MAIL SMTP
SETTING
SENDER NAME
E-MAIL ADDRESS
DEFAULT SUBJECT
SMTP SERVER ADDR.
SMTP PORT NO.
SMTP TIMEOUT
TEXT INSERT
Epson AcuLaser CX37 Series
Settings
Select whether to enable or disable e-mail transmission
operations for this machine.
Specify the name of the e-mail sender (up to 20 char‐
acters) used for network scanning.
The default setting is Epson AL-CX37.
Specify the e-mail address (up to 64 characters) of the
e-mail sender used for network scanning.
Specify the subject (up to 20 characters) of the e-mail
message used for network scanning.
The default setting is from Epson AL-CX37.
Specify the IP address or host name (up to 64 characters)
for the SMTP server. The default setting is 0.0.0.0.
Settings
Specify the port number communicating with the SMTP
server.
Settings
Select the amount of time (in seconds) until the con‐
nection with the SMTP server times out.
Settings
Select whether or not the specified text is inserted into
the e-mail message.
Control Panel and Configuration Menu
Printer/Copier/Scanner User's Guide
DISABLE / ENABLE
1-65535 (Default: 25)
30-300 sec (Default: 60 sec)
OFF / ON
58