Duplexing - Epson AcuLaser CX37DN Series User Manual

Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
6. Close Tray 3.
7. Select PAPER SETUP/TRAY3 PAPER in the UTILITY menu, and then select the setting for the type
of paper that is loaded. See also "Specifications" on page 88.

Duplexing

If the paper has low opacity (high translucency), then the printed data from one side of the page will
show through to the other side. Check your application for margin information. For best results, print
a small quantity to make sure the opacity is acceptable.
Note:
Only plain paper, special paper and thick stock, 60–210 g/m² can be autoduplexed. See "Print Media" on
page 88.
Duplexing envelopes, letterhead, labels, postcards, glossy media or single side only papers is not
supported.
Check your application to determine how to set your margins for duplex (double-sided) printing.
The following Binding Position settings are available.
If "Short Edge (Top)" is selected, the pages will be laid out to flip at the top.
1
1
1
3
Media Handling 108