Registering/Editing Addresses - Epson AcuLaser CX37DN Series User Manual

Note:
For details on entering/editing text, refer to Facsimile User's Guide.
5. To finish editing addresses, press the Back key.
6. Press the u or d key to select FINISH, and then press the Select key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB address) can be deleted.
Note:
Changes made with this procedure will not be applied to the original data (speed dial destination, group
dial destination, etc.).
1. In the main screen (Scan mode), press the u or d key to select the current data destination setting,
and then press the Select key.
2. To delete an e-mail address, press the u or d key to select CHECK/EDIT, and then press the Select
key. Then, press the u or d key to select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3. Press the Stop/Reset key.
4. Press the u or d key to select YES, and then press the Select key.
The selected address is deleted.
Note:
If all specified addresses are deleted, the main screen is displayed.
5. To delete another address, repeat the procedure from step 2.
6. To finish deleting addresses, press the Back key.
7. Press the u or d key to select FINISH, and then press the Select key.

Registering/Editing Addresses

Addresses can be registered/edited in the favorite list, as speed dial destinations or as group dial
destinations.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 154