Epson AcuLaser CX37DN Series User Manual page 232

This message...
JOB CANCELED
MEMORY FILE FULL
MEMORY FULL
NO DUPLEX PAPER
CLOSE DUPLEX FUNC.
OR CHANGE PAPER SIZE
NO NETWORK SETTING
NO SUITABLE PAPER
LOAD PAPER (xxx)
NON GENUINE TONER
CHANGE x TONER
NON SUPPORT PAPER
CLOSE MANUAL DUPLEX
OR CHANGE PAPER SIZE
Epson AcuLaser CX37 Series
means...
While a document was being
scanned from the original glass in
Scan mode, more than one
minute had passed after the first
page of the document was
scanned or the data could not be
sent. Therefore, the scan job was
automatically canceled.
The maximum number of 1,024
image data files has been
reached.
The machine has received more
data than can be processed with
its internal memory.
Duplex (double-sided) printing is
specified, but paper with a size
incompatible with duplex
(double-sided) printing is
selected.
The network settings had not
been completely specified when
the machine was switched to
Scan mode.
Paper suitable for printing is not
loaded in a paper tray.
The installed toner cartridge is
not a genuine Epson product.
The paper is incompatible with
duplex (double-sided) printing.
Printer/Copier/Scanner User's Guide
Do this...
Turn the machine off, and then, after
waiting a few seconds, turn it on
again. When sending multiple pages,
for example, from a book, scan the
first page, and then scan the next
page within one minute.
Turn the machine off, and then, after
a few seconds, turn it on again.
Decrease the amount of data to be
printed (for example, by decreasing
the resolution), and then try printing
again.
Turn the machine off, and then, after
a few seconds, turn it on again.
Decrease the amount of data to be
printed (for example, by decreasing
the resolution), and then try printing
again.
Switch to simplex (single-sided)
printing, or select paper with a size
compatible with duplex
(double-sided) printing.
Before scanning in Scan mode,
specify the network settings in the
NETWORK SETTING and E-MAIL
SETTING menus.
Load paper suitable for printing into a
paper tray.
Installing a genuine toner cartridge is
recommended.
Switch to simplex (single-sided)
printing, or make sure that the paper
is a type compatible with duplex
(double-sided) printing.
Troubleshooting 232