Epson AcuLaser CX37DN Series User Manual page 150

Selecting From the Address Book
The speed dial destinations and group dial destinations registered on this machine are saved in the
address book. Follow the procedure described below to specify an address (e-mail address, FTP
address or SMB address) from the address book as the recipient of the scan data.
Note:
This feature is available only if data has been registered in the address book.
1. With the main screen or Can Use AddressBook displayed, press the Addressbook key four
times so that ADDRESS BOOK appears.
2. Press the u or d key to select LIST, and then press the Select key.
A list of the address book contents appears.
3. Press the u or d key to select the desired data, and then press the Select key.
4. Press the Select key again.
If an FTP address or an SMB address was selected, the destination address is specified.
5. If an e-mail address was selected, press the u or d key to select FINISH, and then press the Select
key.
Note:
To add an additional e-mail address, select ADD in step 5, and then specify the destination. When
sending the data to an FTP address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select CHECK/EDIT in step 5. To delete an address, select
CHECK/EDIT in step 5, and then continue with step 2 of "Deleting a Specified Destination Address".
Searching the Address Book
The destination address (e-mail address, FTP address or SMB address) where the scan data is to be sent
can be specified by searching the address book.
Note:
This feature is available only if data has been registered in the address book.
1. With the main screen (Scan mode) or Can Use AddressBook displayed, press the Addressbook
key four times so that ADDRESS BOOK appears.
2. Press the u or d key to select SEARCH, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 150