Setting A Copy Function - Epson AcuLaser CX37DN Series User Manual

Note:
In order to perform duplex (double-sided) copying or collated (Sort) copying with 2in1/4in1 copying,
specify the necessary settings before performing step 4. For details, refer to "Setting Duplex (Double-
Sided) Copying" on page 134 and "Setting Collated (Sort) Copying" on page 136.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
6. Repeat step 5 until all document pages have been scanned.
If 2in1 is set, printing automatically begins after two document pages (four document pages if
duplex (double-sided) copying was set) have been scanned. If 4in1 is set, printing automatically
begins after four document pages (eight document pages if duplex (double-sided) copying was set)
have been scanned.
7. After all document pages have been scanned, press the Start (Color) key or the Start (B&W) key to
begin printing the remaining pages.

Setting a Copy Function

ID card copying, repeat copying and poster copying can be set.
Note:
❏ The zoom ratio is automatically set (and cannot be changed).
❏ ID card copying, repeat copying and poster copying can only be performed with the original glass.
Position the document pages to be scanned so that they are aligned in the upper-left corner of the
original glass. Since the image is printed 4 mm from the top and left side, adjust the position of the
document as necessary. For details on positioning the document on the original glass, refer to
"Placing a document on the original glass" on page 112.
ID Card Copying
With ID card copying, the back and front of a document, such as a certificate, are copied at full size on a
single sheet of paper.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Copier 130