Specification For Each Function; Stand-Alone Copy Function - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.7 Specification for Each Function

1.7.1 Stand-alone Copy Function

1.7.1.1 Supported Paper and Copy Mode
Table 1-22. Supported Paper and Copy Mode for CX8300/TX400 series
Print
Paper Type Size* 1
Quality
Draft
*1 *1
Plain paper A4 , Letter Standard
Best
Matte paper A4 *1 , Letter *1 Standard
4x6, 5x7,
Photo Paper Standard
A4 *1 , Letter *1
4x6, 5x7,
Prem. Glossy Standard
A4 *1 , Letter *1
4x6, 5x7,
Ultra Glossy Standard
A4 *1 , Letter *1
Note *1 : The model for Latin supports both the letter and A4 sizes. The model for North
America supports letter size only, and the other destination models support A4 size
only.
*2 : Borderless printing of 5x7 size is not supported for EAI.
Table 1-23. Supported Paper and Copy Mode for CX7300/TX200 series
Print
Paper Type Size
Quality
Draft
Plain paper A4 *1 , Letter *1
Standard
Photo Paper
(Photo Paper,
4x6 Standard
Prem. Glossy,
Ultra Glossy)
Note *1 : The model for Latin supports both the letter and A4 sizes. The model for North
America supports letter size only, and the other destination models support A4 size
only.
PRODUCT DESCRIPTION
Dot Micro Border-
Resolution Bi-D
Size Weave
360x120 Eco ON OFF
360x360 VSD1 ON OFF
720x720 VSD3 ON ON
1440x720 VSD3 ON ON
OK*
1440x720 VSD3 ON ON
1440x720 VSD3 ON ON
1440x720 VSD3 ON ON
Dot Micro Border-
Resolution Bi-D
Size Weave
360x120 Eco ON OFF
360x360 VSD1 ON OFF
1440x720 VSD3 ON ON
Specification for Each Function
1.7.1.2 Stand-alone Copy Menu
The stand-alone copy mode menu for the CX8300/TX400 series and CX7300/TX200
series (settable items) are shown in the following tables.
Table 1-24. Copy Menus for CX8300/TX400 series
Menu
Number of copies
Copy type
less
NA
Layout
NA
NA Paper type
Paper size
OK
Print
Quality
2
setting
Zoom
OK
Density
OK
Expansion
(for borderless print)
Table 1-25. Copy Settings for CX7300/TX200 series
Setting Item
Number of copies
less
Copy type
NA
NA
Layout
OK
Paper type
Paper size
Print
Quality
setting
Zoom
Function
Sets the number of copies within the range of 1 to 99.
Selects either color or monochrome.
Selects from the following two layouts:
• With Border (normal layout with 3mm margins)
• Borderless (no margins)
Selects paper type from the options shown in
Selects paper size from the options shown in
Selects print quality from the options shown in
Selects Actual or Auto Fit Page.
Or reduction/enlargement ratio can be specified within the range
of 25% to 400%.
Selects from the nine density levels of -4 to +/-0 to +4.
Selects the margins level (margins bleed off the edges of paper)
from the Standard (100%), Mid. (50%) or Min. (0%).*
Operation and Function
Sets the number of copies within the range of 1 to 99 using the
Copies button.
Selects either color or monochrome with the Color button or
B&W button.
Selects print layout from the following three options:
• Standard (normal layout with 3mm margins)
• Small margin (layout with 1.5mm margins)
• Borderless (no margins)
Selects paper type and size from the options shown in
using the Paper Type button.
Selects print quality from the options shown in
Actual size is selected by default. Autofit can be set by holding
down the B&W / Color button for 3 seconds or longer.
Table 1-22.
Table 1-22.
Table 1-22.
Table 1-23
Table 1-23.
29
Confidential