Cleaning - Bowers & Wilkins 804 D3 Technical Manual

Bowers & Wilkins TECHNICAL SUPPORT

27. Cleaning

The cabinet surfaces will usually only require dusting. If you wish to use an aerosol or
other cleaner, apply the cleaner onto the cloth, not directly onto the product and test a
small area first, as some cleaning products may damage some of the surfaces.
Avoid products that are abrasive, or contain acid, alkali or antibacterial agents. Marks
on the paint surface may be removed with a dilute perfume-free soap solution.
Remove any remaining streak marks by spraying with a proprietary glass cleaner and
lightly wiping dry with a microfiber cloth. Do not use cleaning agents on the drive units
and avoid touching them as damage may result.
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 47 of 51 © Bowers & Wilkins 2016