Table of Contents
Advertisement
Bowers & Wilkins TECHNICAL SUPPORT
Now remove the 2 x Hex Bolts shown in Figure: 30 and lift the Draw Bar Assembly out of the
Cabinet as shown in Figure: 31.
Figure: 31
Once the Sleeve Spring Assembly has been removed from the Cabinet it can be
disassembled further by removing the Circlip as shown in Figure: 32.
Figure: 32
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 29 of 51
Draw Bar Assembly
Circlip
Snuber Plate
MF Sleeve Fixing
Lock Sleeve
Draw Bolt fixing
Draw Bar
Rear Isolator
© Bowers & Wilkins 2016
Hide quick links:
Advertisement
Table of Contents
