Cosmetic Inspection - Bowers & Wilkins 804 D3 Technical Manual

Bowers & Wilkins TECHNICAL SUPPORT

2. Cosmetic Inspection

This is visual check and should be done before any work commences to clarify that
there is no external damage to the 804 D3 Speaker see Figure: 2.
Note: It is recommended that PPE gloves are used for this function.

Check the cabinets

Check both tweeters, Mid - Range & Upper/Lower Base Drivers

Check the Trim Rings

Check both Flow Ports

Check both sets of terminals trays
Figure: 2
Dust Cap
Magnetic Trim Ring
Flow Port
The contents of this document and associated files contain confidential information that is propriety to Bowers & Wilkins, and
are intended solely for the purpose of servicing the product. The information is intended for use by service technicians familiar
with electronic products. No part of the contents should be supplied or published elsewhere.
Page 7 of 51
Tweeter
Mid - Range
Upper Base Driver
Lower Base Driver
Terminals
© Bowers & Wilkins 2016